Industrijska zona 3 br. 15,Bijeljina 76300
info@maflexdoo.com
+ 387 55 244 600

Biegsame Wellen

Biegsame Wellen

Biegsame Wellen sind Maschinenelemente vorgesehen für die Übertragung der Wende der Bewegung zwischen zwei Achsen die sich nicht berühren oder die sich miteinander mit der Lage während der Arbeit abwechseln

Biegsame Wellen werden mit dem Draufhüllen von qualitativwm Stahldraht in mehrere Schichten hergeswtellt

Abhängig von der Anwendung werden die Flexibeln Stangen geteilt auf:

1. Biegsame Wellen für die Übertragung der Wende der Bewegung, Durchmesser bis Ø 6mm;

  • Biegsame Wellen Ø 2,2 mm;
  • Biegsame Wellen Ø 3,2 mm;
  • Biegsame Wellen Ø 3,8 mm;
  • Biegsame Wellen Ø 4,0 mm;
  • Biegsame Wellen Ø 5,2 mm;
  • Biegsame Wellen Ø 6,0 mm.

ANWENDUNG:
für den Betrieb von Kontrollinstrumenten und der Fernsteuerung, und am meisten fürs Registrieren der Schnelligkeit, des abgelegten Wegs und Arbeitsdauer, mit dem Schnellmesser, Tachograf und Wendemessers, eingebaute und Mottorräder, PKW-s und LKW-s und Traktoren. .

2. Biegsame Wellen für die Kraftübertragung, Durchmesser über Ø 6mm.

  • Biegsame Wellen Ø 7,0 mm;
  • Biegsame Wellen Ø 10,0 mm;
  • Biegsame Wellen Ø 12,0 mm;
  • Biegsame Wellen Ø 15,0 mm;
  • Biegsame Wellen Ø 18,0 mm;
  • Biegsame Wellen Ø 20,0 mm;
  • Biegsame Wellen Ø 25,0 mm;

ANWENDUNG:
für die Übertragung der Motorkraft bis zu Arbeitsorganen bei Pervibratoren, beweglichen Flexmaschinen und Bohrern der Reinigungsgeräte für Kasselschläuche, Machinen für Holzbearbeitung und anderes.


Biegsame Wellen, als Mschinenanlage besteht aus einem aus Metall Schutzkruste umhüllt mit Kunststoffhülle, Flexibelr Stange (Kern) und zwei kompletten von Anschlüssen von denen einer auf der Betriebsseite ist und der andere an der Instrumentenseite.

Komplette Biegsame Wellen können wir mit verschiedenen Anschlüssen von beiden Seiten und mit verschiedenen Schutzkruste herstellen.

Anschlüsse für Biegsame Wellen stellen wir aus entsprechenden Stahl her, nach Dimensionen und der Form sind die an Dimensionen und Anschlusssystemen des Motors und Werkzeuge – Instrumente angepasst

Für alle Durchmesser der Flexibeln Stnagen stellen wir dern entsprechende Bovdens (Schutzkruste, Umhang) womimt für:
  • Durchmesser bis Ø 12,0 mm stellen wir Bovden mit Kunststoffhülle her;
  • Durchmesser über Ø 12,0 mm stellen wir Bovden mit Flexibelr Metallausführung her.

Neben Flexibeln Stangen und Bovden sind in unserem Herstellungsprogramm Geräte die für seine Achse die Kraftübertragung und Wendemoment haben mit den Flexibeln Stangen und zwar:



1.1. Pervibrator B P M - 1
Besteht aus folgenden Teilen:
  • Zweitakt- Benzinmotor – Typ UMO 06
  • Flexibeln Stangen – Typ SV – 12M
  • Vibratorkopf Typ VIG – M ø 45
1.2. Pervibrator B P M - 2
Besteht aus folgenden Teilen:
  • Zweitakt- Benzinmotor la 300
  • Flexibeln Stangen – Typ SV – 12M
  • Vibratorkopf Typ VIG – M ø60
1.3. Pervibrator D P M - 2
Besteht aus folgenden Teilen:
  • Viertakt- Dieselmotor LDA 450
  • Zwei Flexibeln Stangen – Typ SV – 12M
  • Zwei Vibratorkopfen Typ VIG – M ø60
1.4. Pervibrator E P M - 1
Besteht aus folgenden Teilen:
  • Transformator mit Kabel
  • Elektromotor mit Kabel
  • Flexibeln Stangen – Typ SV – 12M
  • Vibratornadel Typ VIG – M ø 45
It is known that soot deposits, which are formed on the walls of the flue hose reduce the efficiency of thermal power fuel. To reduce these losses, and deposits must be removed. Earlier this done manually and it was slow, difficult, dirty and unhealthy job. Cleaning of boiler tubes is done quickly, easily and well to our devices. The advantages of using these devices are undoubtedly large compared to manual cleaning:
  • significantly higher quality of cleaning
  • excluded the possibility of damage to pipes
  • significantly shortening the time required for cleaning. Manual cleaning is performed by 5 workers for 15 hours while our device 2 workers performing the job for only 5 hours
  • The savings in fuel consumption. Thanks to the quality of cleaning reduces the losses which can result in fuel savings that can be up to 10%
Possibility of applying:
Devices can be used for cleaning all types of boiler tube of inner diameter DN 38 to DN 75 mm and lengths up to 13 m.

Operating principles:
The chuck positioned at the end of a flexible shaft which receives rotary motion from the electric motor is set brush or other cleaning tools. By insertion of a flexible shaft with chuck, and a brush for cleaning the tube and the rotation the brushes to remove plaque from the walls of the tube.
Apparatus for grinding and polishing products that “Panaflex” have very simple structure, low weight, ease of operation and maintenance and high elasticity of the flexible shaft. They consist of: drive motor, flexible shaft, chuck and the base (only for devices UBM 10-8S and the UBM 15-8S).

Thanks to the traits possessed by these devices are widely used in industrial process equipment, rubber, wood and glass industry, tool, pattern shop, foundry , hardware shops and other places for grinding and polishing tools, where the position is changed in all directions during the work and where other devices to access difficult or impossible.

Before starting work with the devices necessary do the following:
1. For three-phase drive motors to verify direction of rotation of the engine by comparing it with the arrow marks. In the case of the opposite direction of rotation of two phases to replace the plug. For single phase motor rotation direction is factory set.
2. Connect the flexible shaft to the drive motor and then connect the chuck with the proper tools.
3. After these actions the device is ready for work.


Apparatus for grinding and polishing UBM UBM 12-1 and 15-1 were mono phase with a single speed and UBM UBM 12-2 and 15-2 are phase two the number of revolutions and the UBM 15-2A, which is indirectly reduced. Change of speed is done by turning the switch in position 1 or 2with the proviso that it must ensure that during the transition from larger to smaller engine speed to a complete stop.

UBM devices and 10-8S 15-8S UBM are three phase. Change the number of turning them come in the following way: pick up the fuse lever, turn a bit eccentric until the required speed appears on the housing slot and then turn the cam to the right until it snaps in the fuse groove. With regard to the two eccentric read speed, the upper smaller number is obtained when the switch drive motor is in position 1 and the lower higher speed when the switch is in second position Change the number of revolutions made only when the engine is idle.

ANWENDUNG:
Es wird für das Aktivieren von Arbeitsgeräten die entfernt vom Kommandenplatz sind banutz in dr Industrie der Schienenfahrzeuge, der Industrie der Wirtschaftsmaschinen, Bergbauten, Maschinenbauten...
Technische Angaben:
- Arbeitsgang: 150mm,70mm
- Maximale Läng: 5000mm
- Höchsterlaubte Anstrengung beim Ausstrecken 10 KN
- Höchsterlaubte Anstrengung beim Druck 2,5 KN
- Benutzergrad 97 %
- Der minimale Verbeugungsradius 200 mm
- Elastische Deformation bei Anstengung von 100 N 0,05 mm/m

Sie werden in folgenden Längen hergestellt:
1.700 mm 1.877 mm 2.100 mm 2.300 mm 2.400 mm 2.830 mm 3.100 mm
3.300 mm 3.700 mm 4.000 mm 4.450 mm 5.200 mm 5.700 mm

Es besteht die Möglichkeit der Herstellung nach Wunsch des Käufers